Features and Benefits
· Integral seven day programmable timer
· Energy saving ECO mode
· Temperature programmable between 80°C - 98°C
· Comprehensive diagnostics system
· Integral stainless steel drip tray included
Easy to install on a stable worktop.
Designed for direct connection to a potable cold water supply using the 1.5 metre (3/4” BSP) hose supplied. An isolating valve should be installed between the supply and the heater. Rear supply connection and choice of rear or front overflow.
The CT8000-6 should be connected to a 230 volt supply with a suitable break capacity of 30 amps.
Brushed stainless steel case.
Stainless steel heating chamber.
Low voltage switching.
Two safety cut-outs.
|Water Boiler Specification|
|Heat-up time (mins)||49|
|Hourly Output (cups)||340|
|Hourly Output (litres)||57|
|Power loading (kW)||6|
|Rapid Draw-Off (cups)||270|
|Rapid Draw-Off (litres)||45|
|Rear connection clearance (mm)||45|
|Recovery Rate (litres)||1|
|Stand by Power (kW/h)||0.17|
|Tap clearance to drip tray (mm)||185|
Instanta CT8000-6 Water Boiler - Water BoilersX