Features and Benefits
· Electronically controlled for constant temperatures
· Programmable down to 80°C if required
· Simple push and hold dispense button
· Energy saving ECO mode
· Lock-off setting using electronic key-fob
· Early warning LCD diagnostics
· Five water level sensors
Counter mounted with drip tray.
Designed for direct connection to a potable cold water supply using the 1.5 metre (3/4” BSP) hose supplied. An isolating valve should be installed
between the supply and the heater. Rear supply connection and choice of rear or front overflow.
Fitted with 1.75 metres of cable and a 13amp moulded plug.
Brushed stainless steel case.
Stainless steel heating chamber.
Low voltage switching.
Two safety cut-outs.
The locking system is activated by touching an
electronic key fob against a sensor (located below
the display panel).
The boiling water dispense function can be set up in
four different ways;
1 NONE/OPEN (Standard setting) – No lock.
Simply push & hold button to dispense
2 TOGGLE - Key fob turns the dispense function
on and off sequentially, as required.
3 TIMED – Boiling water dispense is available for a
pre-set time (adjustable in minutes), determining
how long it can be used before locking off.
4 ONE-SHOT – A single drink can be dispensed
before the boiling water function locks off.
One key fob is supplied with each boiler with
additional keys available from Instanta spares
department (Part No: DBKF021). Up to 20 individual
keys can be programmed.
|Water Boiler Specification|
|Heat-up time (mins)||32|
|Hourly Output (cups)||168|
|Hourly Output (litres)||28|
|Power loading (kW)||3|
|Rapid Draw-Off (cups)||72|
|Rapid Draw-Off (litres)||12|
|Rear connection clearance (mm)||45|
|Recovery Rate (litres)||0.5|
|Stand by Power (kW/h)||0.09|
|Tap clearance to drip tray (mm)||145|
Instanta DB2000 Water Boiler - Water BoilersX