Features and Benefits
· Introductory diagnostic system
· Three models available
· Large heavy duty non-drip taps
· Mirror finished stainless steel case
As per instruction manual supplied.
Designed for direct connection to a potable cold water supply using fittings supplied.An isolating valve should be installed between the supply and the heater. These wall mounted boilers have a rear connection and overflow and requires two bar incoming water pressure.
To be connected to 230 volt 13 amp supply.
Polished stainless steel case.
Stainless steel heating chamber.
Low voltage switching.
Two safety cut outs.
|Water Boiler Specification|
|Heat-up time (mins)||30|
|Hourly Output (cups)||162|
|Hourly Output (litres)||27|
|Power loading (kW)||3|
|Rapid Draw-Off (cups)||60|
|Rapid Draw-Off (litres)||10|
|Recovery Rate (litres)||0.5|
|Stand by Loss (kW/h)||0.1|
|Tap Depth (mm)||85|
Instanta WA10N Water Boiler - Water BoilersX